Enermax cyberbron III 850w non-modular power supply — 80 plus bronze, atx 3.1, pcie 5.1
🔥Πωλείται γρήγορα!
Enermax cyberbron III 850w non-modular power supply — 80 plus bronze, atx 3.1, pcie 5.1
EXTRA -10%
από
€ 89.42
σε
- 10%
- 10%
€ 80.48
Aπομένουν μόνο 1!
ή
Πλήρωσε σε 3, 6 ή 9 άτοκες δόσεις με 0 χρεώσεις υπηρεσίας χρησιμοποιώντας το
[{"value":"1","url":"/on/demandware.store/Sites-Jinius-Site/el_CY/Product-OfferAvailability?p11Quantity=1&pid=8159954&productId=115ed98c-a5c7-4bba-9dea-a27c4d025a5e&quantity=1"}]
–+
[{"value":"1","url":"/on/demandware.store/Sites-Jinius-Site/el_CY/Product-OfferAvailability?p11Quantity=1&pid=8159954&productId=115ed98c-a5c7-4bba-9dea-a27c4d025a5e&quantity=1"}]
–+
Jinius Promo
EXTRA -10% έκπτωση στο καλάθι! (Μέγιστη έκπτωση €40)
160
Points earned
Χαμηλό απόθεμα
Περιγραφή
Αριθμός προϊόντος:
115ed98c-a5c7-4bba-9dea-a27c4d025a5e
The Enermax Cyberbron III is an 850W non-modular ATX 3.1 power supply designed for demanding gaming builds and workstations. With a native PCIe 5.1 / 12V-2x6 connector and DC-DC architecture, it delivers clean, stable power without the premium price of fully modular units.
Efficiency & Reliability
80 PLUS Bronze certified — efficiency ≥88% at 50% load
DC-DC single-rail design for tight voltage regulation on all rails
High-quality Japanese 105°C primary capacitors for long-term durability
ErP Lo
Λεπτομέρειες
The Enermax Cyberbron III is an 850W non-modular ATX 3.1 power supply designed for demanding gaming builds and workstations. With a native PCIe 5.1 / 12V-2x6 connector and DC-DC architecture, it delivers clean, stable power without the premium price of fully modular units.
Efficiency & Reliability
- 80 PLUS Bronze certified — efficiency ≥88% at 50% load
- DC-DC single-rail design for tight voltage regulation on all rails
- High-quality Japanese 105°C primary capacitors for long-term durability
- ErP Lot 6 compliant — under 1W standby power consumption
GPU & Connectivity
- 1× native PCIe 5.1 / 12V-2x6 connector (600W) — no adapter needed
- 2× PCIe 6+2 pin GPU connectors
- 2× EPS 4+4 pin CPU connectors | 1× 20+4 pin ATX motherboard
- 6× SATA, 2× Molex | Individual mesh-sleeved cables
Technical Specifications
| Specification | Value |
|---|---|
| Rated Power | 850W |
| Standard | ATX 3.1 / Intel ATX 3.1 |
| Efficiency | 80 PLUS Bronze (≥88% @50% load) |
| Input Voltage | 100–240V AC, 50/60 Hz |
| PFC | Active |
| Fan | 120mm FDB (Fluid Dynamic Bearing) |
| Cabling | Non-Modular, mesh-sleeved |
| PCIe 5.1 Connector | 1× 12V-2x6 (600W) |
| PCIe 6+2 pin | 2× |
| SATA / Molex | 6× SATA / 2× Molex |
| Protections | OCP, OVP, UVP, OPP, OTP, SCP |
| Dimensions | 150 × 86 × 140 mm |
| Warranty | 3 years |
| Part Number | EMB850EWT-NAC |
| EAN | 4713157729163 |
★ Singular Recommends
For who: Builders on a tight budget who want ATX 3.1 compliance and a native 12V-2x6 connector for a mid-to-high-range GPU — RTX 4070, RX 7900 GRE or similar — without spending on a semi-modular or fully modular unit.
The real reason to buy it: The Cyberbron III punches above its price. The native 12V-2x6 cable at 600W handles modern high-end GPUs safely, the DC-DC architecture keeps secondary rails stable, and the 120mm FDB fan runs quietly under light loads. Japanese capacitors and a 6-way protection circuit mean this is a proper PSU, not a spec-sheet special.
Know before you buy: Non-modular — all cables are fixed and permanently attached. Cable management will require more effort compared to semi or fully modular units. Only 2 traditional PCIe 6+2 connectors alongside the 12V-2x6, so multi-GPU setups are not supported. 80 PLUS Bronze only — not ideal for 24/7 workloads where Gold or Platinum efficiency matters.