Κλείσιμο

Mercola cerafix & grout 1.25kg

Mercola cerafix & grout 1.25kg image number null
MERCOLA

Mercola cerafix & grout 1.25kg

MERCOLA

Mercola cerafix & grout 1.25kg

Επιλογή Χρώμα: White
–+
–+
€ 3.85
17
Points earned
  • Μπορείτε να κερδίζετε βαθμούς Ανταμοιβή κάθε φορά που πραγματοποιείτε μια πληρωμή με τις κάρτες της Τράπεζας Κύπρου.
  • Ο αριθμός των βαθμών Ανταμοιβή και το αντίστοιχο ποσό χρημάτων που εμφανίζονται είναι ενδεικτικά και μπορεί να διαφέρουν κατά καιρούς. Θέλετε να μάθετε περισσότερα; Ελέγξτε τις Συχνές Ερωτήσεις μας εδώ.
  • Εάν είστε δικαιούχο μέλος του σχεδίου επιβράβευσης Pronomia της Τράπεζας Κύπρου, θα λαμβάνετε επιπλέον βαθμούς Ανταμοιβή ανάλογα με την βαθμίδα σας.
Από Mr.Bricolage
Σε απόθεμα
Εκτιμώμενος χρόνος παράδοσης: 3 - 5 μέρες
Εκτιμώμενη τιμή μεταφορικών: Δωρεάν αποστολή

Περιγραφή

Αριθμός προϊόντος: a83896d8-8300-425b-87f9-3104db2dea29

DESCRIPTION:

CERAFIX & GROUT is ready mixed white acrylic wall and floor tile adhesive and grout. It contains acrylic resins, inert particles and special additives which offer excellent adhesion on vertical and horizontal building surfaces. Presents excellent moisture resistance and high yield. It is suitable for interior and exterior use.

ADVANTAGES:

Ready mixed formula
Easy to apply – no mixing, no mess
Excellent bonding strength
Excellent workability
Extended open time
Moisture resistance
Interior and exterior use
Easy, clean and fast application

APPLICATIONS:

Fixing and grouting ceramic tiles and decorative bricks on walls and floors on various substrates, such as concrete, plaster, blockwork, wood, cementboard, plasterboard, MDF and most common building surfaces.
Fixing tiles on porous surfaces such as unpolished marble, aerated concrete blocks, cement tiles etc.
Suitable for bathrooms and exterior applications


SPECIFICATIONS:

Coverage: 1 - 3 kg/m2

Thinning: no

Application: by knife

Initial bonding: 6 hours 20oC

Final bonding: 10 - 20 hours 20oC

Exterior use

Interior use

Application temperature: 10oC - 35oC

Cleaning: with water


INSTRUCTIONS FOR USE:

Substrate preparation:

Make sure that substrates are leveled, clean, free of oily residues, loose materials, dust etc.
Cementboards, plasterboards, chipboard, wood, MDF and similar surfaces must be primed with ISOCRYL DUR or ISOCRYL DUR AQUA in order to increase water resistance and bonding strength.
New plaster must be a minimum of 4 weeks old before tiling.

Application:

The mixture should be applied uniformly on the surface using a notched trowel - spatula according to the size of the tiles and floor or wall application.
The tiles should be fixed by pressing them in the desired position within 20 - 40 minutes in order to avoid skin formation. Less time is required for dry and absorbent surfaces or under high temperatures.
All surplus adhesive must be removed whilst the adhesive is still wet using a dampened cloth or sponge, particularly along the grout lines.
Surfaces are ready for grouting within 12 hours with the same material.

It is advisable to perform a suitability test for each application.

REMARKS:

Do not add water, as this will decrease adhesive’s strength and waterproofing properties.
Periodical stirring is advised using a spatula.
CERAFIX & GROUT is not suitable for applications experiencing constant immersion in water.
Allow surfaces to dry completely for 7 days before contact with water in shower areas – baths etc.

Χαρακτηριστικά

Γενικά Χαρακτηριστικά

  • Μέγεθος: 1.25kg

Λεπτομέρειες