Close

Fsp hydro ptm pro 1650w ppa16f0101 atx 3.1 fully modular power supply 80 plus platinum pcie 12v-2x6 black

Product image: Fsp hydro ptm pro 1650w ppa16f0101 atx 3.1 fully modular power supply 80 plus platinum pcie 12v-2x6 black-null
Product image: Fsp hydro ptm pro 1650w ppa16f0101 atx 3.1 fully modular power supply 80 plus platinum pcie 12v-2x6 black-null
Product image: Fsp hydro ptm pro 1650w ppa16f0101 atx 3.1 fully modular power supply 80 plus platinum pcie 12v-2x6 black-null
Product image: Fsp hydro ptm pro 1650w ppa16f0101 atx 3.1 fully modular power supply 80 plus platinum pcie 12v-2x6 black-null
Product image: Fsp hydro ptm pro 1650w ppa16f0101 atx 3.1 fully modular power supply 80 plus platinum pcie 12v-2x6 black-null
FORTRON-SOURCE
🔥Selling fast!

Fsp hydro ptm pro 1650w ppa16f0101 atx 3.1 fully modular power supply 80 plus platinum pcie 12v-2x6 black

from €351.48 to - 10% - 10% €316.33
Only 2 left!
or
Pay in 3, 6 or 9 interest-free monthly installments and 0 service fees with Fleksy image
Select Color: Black
Low stock
–+
–+
632
Points earned
You can earn Antamivi points every time you make a payment using your Bank of Cyprus cards.
The number of Antamivi points and the corresponding amount of money displayed are indicative and may vary from time to time. Want to know more? Check out our FAQs here.
If you are an eligible member of the Bank of Cyprus loyalty scheme Pronomia, you will receive additional Antamivi points based on your assigned tier.
From: Singular Computers Systems LTD
Buy more from this shop
Delivery options
Delivery to your door
FREE shipping on orders over €85.00 from Singular Computers Systems LTD
Est. delivery: 29 Jun - 01 Jul
Free

Description

Item No. 1c1f286c-e64c-4a31-8170-4a62c85dcc09
FSP Hydro PTM Pro 1650W ATX 3.1 Power Supply 1650W80 Plus PlatinumDual 12V-2x6Fully Modular The FSP Hydro PTM Pro 1650W is the flagship of the Hydro PTM Pro range — a fully modular ATX 3.1 power supply delivering 1650W with 80 Plus Platinum (and Cybenetics Platinum) efficiency, built for extreme multi-GPU workstations and top-tier overclocked gaming rigs. It carries part number PPA16F0101 (model HPT2-1650M, EAN 4713224529054) and ships with two native PCIe 12V-2x6 connectors for the most demand

Details

FSP Hydro PTM Pro 1650W ATX 3.1 Power Supply

1650W80 Plus PlatinumDual 12V-2x6Fully Modular
The FSP Hydro PTM Pro 1650W is the flagship of the Hydro PTM Pro range — a fully modular ATX 3.1 power supply delivering 1650W with 80 Plus Platinum (and Cybenetics Platinum) efficiency, built for extreme multi-GPU workstations and top-tier overclocked gaming rigs. It carries part number PPA16F0101 (model HPT2-1650M, EAN 4713224529054) and ships with two native PCIe 12V-2x6 connectors for the most demanding graphics cards. An LLC full-bridge topology with DC-DC module holds voltage regulation within ±1%, while Japanese electrolytic capacitors and a conformal coating tested to 95% relative humidity back FSP's 10-year warranty. Typically in stock with fast delivery across Cyprus.
Compatibility & installation
Complies with ATX12V V3.1 and EPS12V V2.92. Important: this 1650W model runs on 200–240V mains only — standard for Cyprus and the EU, but it will not operate on 110–120V supplies. The two native PCIe 12V-2x6 (12VHPWR-style) cables power current-generation GPUs directly with no adapter; older cards use the four 6+2 pin PCIe leads. Confirm your case supports a standard ATX PSU of 180 mm depth (180 × 150 × 86 mm). Use only the FSP-supplied modular cables — cables from other brands are not cross-compatible even when the connectors physically fit.

Best For

✓Extreme multi-GPU and AI / rendering workstations
✓Top-tier overclocked gaming rigs with RTX 50-series
✓Dual-GPU builds needing two native 12V-2x6 cables
✓Efficiency-focused builds — 80 Plus & Cybenetics Platinum
✓Quiet operation — ECO semi-fanless below 30% load
✓Long-term reliability seekers (10-year warranty)

Key Features

 
1650W with Dual 12V-2x6
Two native 12V-2x6 connectors and ATX 3.1 / EPS12V V2.92 compliance feed the highest-end and even dual-GPU systems without adapters.
 
80 Plus & Cybenetics Platinum
Certified to at least 94% efficiency at 50% load — less wasted heat and lower running costs even at extreme wattage.
 
Full-Bridge LLC + DC-DC
Tight ±1% voltage regulation above 10% load change on a single +12V rail (137.5A) for stable, clean power to every component.
 
Quiet 135mm FDB Fan + ECO
A long-life fluid-dynamic-bearing fan with 0dBA semi-fanless mode stays silent under 30% load and ramps Gently under heavier loads.

Technical Specifications

Identification
Part Number PPA16F0101
EAN / GTIN 4713224529054
MPN HPT2-1650M
Brand / Series FSP / Hydro PTM Pro
Power
Rated OuTPUt Power 1650W (continuous)
80 Plus Certification Platinum — ≥94% efficiency at 50% load
Cybenetics Platinum efficiency, A noise
+12V Rail Single rail, 137.5A (1650W)
PFC Active PFC
Input Voltage 200–240V, 10A, 50–60Hz — EU/230V mains only
Connectors
Motherboard 1 × 20+4 pin ATX
CPU / EPS 2 × 4+4 pin
PCIe 12V-2x6 2 — native 12VHPWR-style, no adapter
PCIe 6+2 pin 4
SATA 12
Peripheral (Molex) 4
Design & Cooling
Form Factor ATX (ATX12V V3.1 / EPS12V V2.92)
Cabling Fully modular, flat ribbon cables
Cooling 135mm FDB fan — ECO semi-fanless below 30% load
Topology LLC full-bridge + DC-DC module
Capacitors Japanese electrolytic
Coating Conformal coating — protects against dust/humidity, tested to 95% RH
Protection & Physical
Protections OCP, OVP, SCP, OPP, OTP, UVP — full guardian circuit
Dimensions (L×W×H) 180 × 150 × 86 mm
Colour Black (changeable side stickers)
Safety IEC 62368 compliant
Warranty 10 years

Frequently Asked Questions

Does the Hydro PTM Pro 1650W work with the latest RTX graphics cards?
Yes. It provides two native PCIe 12V-2x6 connectors that plug straight into current-generation GPUs — no 12VHPWR adapter needed — and each cable meets the ATX 3.1 transient-load requirements those cards demand, even in dual-GPU systems.
What kind of build needs 1650W?
1650W targets the extreme end: multi-GPU AI, rendering and simulation workstations, and the most heavily overclocked single-GPU gaming rigs. For a typical high-end single-GPU build, a 1000–1350W unit is usually sufficient.
Does this power supply run on standard Cyprus mains?
Yes. It operates on 200–240V, which is standard across Cyprus and the EU. Note it is a 230V-only unit and will not work on 110–120V supplies found in some other regions.
Will the fan always be running?
No. With the ECO semi-fanless switch enabled, the 135mm FDB fan stays off (0dBA) under roughly 30% load and only spins up under heavier demand, keeping everyday use whisper-quiet.
Singular Expert Insight
The Hydro PTM Pro 1650W is built for systems that Genuinely draw extreme power — dual-GPU workstations and no-compromise overclocked rigs — pairing two native 12V-2x6 cables with 80 Plus and Cybenetics Platinum efficiency and a single 137.5A +12V rail. Most single-GPU gaming builds will never load it, so the 1350W or 1000W siblings are the more sensible (and cheaper) choice for them; reach for the 1650W only when your hardware truly needs the headroom. Remember it is a 230V-only unit, which suits Cyprus perfectly. Browse the full range of PC power supplies to compare wattages and efficiency tiers.

Buyer's Guide

Buy it if
You run an extreme multi-GPU or heavily overclocked system and want dual 12V-2x6, Platinum efficiency and a 10-year warranty.
Skip it if
You have a single-GPU build — 1650W is overkill; a 1000–1350W Platinum unit runs nearer its efficiency sweet spot for less.
Also consider
The Hydro PTM Pro 1350W for high-end single-GPU rigs, or the 1000W for mainstream high-end builds.