*DENSITY: 1.20g/cm³

*MELT INDEX: 8.2190°C/2.16kgg/10min

*TENSILE STRENGTH（X-Y: ≥ 60 MPa

*ELONGATION AT BREAK（X-Y: 19

*BENDING STRENGTH: 80MPa

*PRINTING SPEED: 30-600mm/s

*PRINT LAYER THICKNESS: 0.2mm

*Standard PLA is very fragile and it breaks easily. On the other hand, there is no problem with PLA+ when you bend it of course, it breaks also, but at a certain point.

*Rapid PLA+ Filament:
*High-Speed Printing
*Enhanced Strength Toughness
*Good Layer Adhesion
*±0.02mm Dimensional Accuracy
*Less-tangle Neatly Wound
*No Clogging or Bubbles

*Designed for Fast Printing:
RAPID PLA+ filament boasts a dimensional accuracy of +/- 0.02mm and a strict tolerance of 1.75mm diameter, which ensures smooth and consistent filament outflow and reduces the risk of nozzle clogging.

By optimizing the material molecules and balancing the material properties, the filament can quickly absorb heat and rapidly melt, making it smoothly extrude and resulting in smooth and consistent prints every time even at the fast printing speed of 250mm/s on our Neptune 4 series.

*Less-tangle Neatly Wound:
All filaments are fully mechanical wound with a secondary sub-winding and strict manual inspection to ensure that the lines are neatly arranged on the reels, reducing tangles and possible snapping.

Made from renewable resources, our filament is safe, eco-friendly, and biodegradable, making it a sustainable choice for all your printing needs. For even more eco-friendly, all filaments come in cardboard spools that degrade faster than plastic spools. Besides, there are three holes on the spool for observing the remaining filament and replacing it in time.

*Widely Compatible:
All RAPID PLA+ filaments are vacuum sealed with desiccant to prevent moisture and dust, compatible with most 1.75mm FDM 3D printers, ensuring that you can use them with confidence in your existing printers.