Κλείσιμο

Ubiquiti unifi uacc-cable-patch-el-0.15m-w etherlighting nano-thin patch cable 0.15m 10g translucent white

Product image: Ubiquiti unifi uacc-cable-patch-el-0.15m-w etherlighting nano-thin patch cable 0.15m 10g translucent white-null
UBIQUITI
🔥Πωλείται γρήγορα!

Ubiquiti unifi uacc-cable-patch-el-0.15m-w etherlighting nano-thin patch cable 0.15m 10g translucent white

€ 9.78
ή
Πλήρωσε σε 3, 6 ή 9 άτοκες δόσεις με 0 χρεώσεις υπηρεσίας χρησιμοποιώντας το Fleksy image
Επιλογή Χρώμα: White
Σε απόθεμα
–+
–+
18
Points earned
Μπορείτε να κερδίζετε βαθμούς Ανταμοιβή κάθε φορά που πραγματοποιείτε μια πληρωμή με τις κάρτες της Τράπεζας Κύπρου.
Ο αριθμός των βαθμών Ανταμοιβή και το αντίστοιχο ποσό χρημάτων που εμφανίζονται είναι ενδεικτικά και μπορεί να διαφέρουν κατά καιρούς. Θέλετε να μάθετε περισσότερα; Ελέγξτε τις Συχνές Ερωτήσεις μας εδώ.
Εάν είστε δικαιούχο μέλος του σχεδίου επιβράβευσης Pronomia της Τράπεζας Κύπρου, θα λαμβάνετε επιπλέον βαθμούς Ανταμοιβή ανάλογα με την βαθμίδα σας.
Από: Singular Computers Systems LTD
Περισσότερα από αυτό το κατάστημα
Επιλογές μεταφορικών
Σημεία / Θυρίδες παραλαβής
Εκτ. παράδοση: 03 Αυγ - 04 Αυγ
Δωρεάν
Παράδοση στην πόρτα σου
Δωρεάν αποστολή για παραγγελίες άνω των € 85.00 από το Singular Computers Systems LTD
Εκτ. παράδοση: 03 Αυγ - 05 Αυγ
€ 3.49

Περιγραφή

Αριθμός προϊόντος: ca5efa07-0300-4ecc-b832-771cf08e55b2
Ubiquiti UniFi Etherlighting Patch Cable — 0.15m, Translucent White 10GBE supportEtherlightingLength 0.15m2.5 mm nano-thinPoE+++ ready The Ubiquiti UACC-Cable-Patch-EL-0.15M-W (EAN 0810084693476) is a 0.15 m 2.5 mm nano-thin patch cable with translucent booted RJ45 connectors, built to showcase Etherlighting: on Etherlighting-enabled UniFi switches such as the USW-Pro-Max series, the illuminated port glows through the translucent boot so you can identify and colour-code connections at a glance

Λεπτομέρειες

Ubiquiti UniFi Etherlighting Patch Cable — 0.15m, Translucent White

10GBE supportEtherlightingLength 0.15m2.5 mm nano-thinPoE+++ ready

The Ubiquiti UACC-Cable-Patch-EL-0.15M-W (EAN 0810084693476) is a 0.15 m 2.5 mm nano-thin patch cable with translucent booted RJ45 connectors, built to showcase Etherlighting: on Etherlighting-enabled UniFi switches such as the USW-Pro-Max series, the illuminated port glows through the translucent boot so you can identify and colour-code connections at a glance. Despite the ultra-thin profile it is rated by Ubiquiti for 10GBE and PoE+++ power delivery. Typically in stock with fast delivery across Cyprus.

Compatibility note: Standard RJ45 — works with any Ethernet device. The Etherlighting glow effect, however, appears only when connected to an Etherlighting-enabled UniFi switch (e.g. USW-Pro-Max); on other equipment it behaves as a normal high-quality patch cable. Indoor use only.

Key Features

 
Etherlighting port identification
Translucent boots pick up the light of Etherlighting-enabled UniFi switch ports, so each link can be colour-coded and traced instantly in a busy rack.
 
10GBE in an ultra-thin profile
Rated by Ubiquiti for 10GBps at patch lengths — plenty of headroom for 2.5G and 10G UniFi gear — while the 2.5 mm nano-thin jacket keeps bundles tidy.
 
PoE+++ ready
Passes Ubiquiti's highest PoE power tier alongside data, so it happily feeds PoE switches, access points and cameras at patch distances.

Technical Specifications

Identification
Part Number UACC-Cable-Patch-EL-0.15M-W
EAN / GTIN 0810084693476
MPN UACC-Cable-Patch-EL-0.15M-W
Cable
Family UniFi Etherlighting Patch Cable
Supported data rate 10GBps (per Ubiquiti official datasheet)
PoE support Up to PoE+++ — Ubiquiti's highest PoE power tier, carried alongside data
Length 0.15 m
Jacket 2.5 mm thermoplastic elastomer (TPE) — nano-thin
Shielding UTP conductors — unshielded twisted pair, standard for indoor patch runs
Conductor Stranded copper
Connectors 2 × translucent booted RJ45
Bend radius Min. 21 mm
Standards TIA/EIA-568-B.2, ISO/IEC 11801
Flame rating VW-1 (UL1581) — self-extinguishing jacket per UL vertical flame test
Physical
Operating environment Indoor, -20 to 60°C
Colour Translucent white

Frequently Asked Questions

Do I need a special switch for the UACC-Cable-Patch-EL-0.15M-W?
No — it works as a normal patch cable with any RJ45 equipment. The Etherlighting glow effect only appears with Etherlighting-enabled UniFi switches such as the USW-Pro-Max series.
Is it really 10GBps capable? The listing elsewhere says 2.5G.
Ubiquiti's official datasheet rates the whole Etherlighting family for 10G data rates at patch lengths, with support up to PoE+++. Some reseller listings understate this at 2.5GBE.
What is the difference between the EL and the EL-C6A version?
Both glow with Etherlighting and are rated for 10G. The EL is the 2.5 mm nano-thin version; the EL-C6A "Premium" is slightly thicker at 3 mm with a braided jacket and shielded RJ45 connectors for tougher, interference-prone spots.
Singular Expert Insight
If you run an Etherlighting-capable UniFi switch, these are the patch leads that complete the effect — the port light travels into the translucent boot, turning the patch panel into a live, colour-coded map. For most indoor racks this nano-thin EL version is ideal; if the cable will be handled often, consider the braided EL-C6A Premium sibling.

Buyer's Guide

Buy it if
You use Etherlighting-enabled UniFi switches (USW-Pro-Max and newer) and want glowing, colour-coded, 10G-ready patch runs of 0.15m.
Skip it if
You need outdoor or long horizontal runs — this is an indoor patch cable with ultra-fine conductors; use the UACC-Cable-Patch-Outdoor series or bulk cable instead.
Also consider
The braided, shielded EL-C6A Premium version for tougher spots, or other lengths of the family (0.15 m to 15 m).