Κλείσιμο

Ubiquiti uacc-rack-pm-kit unifi snapmount rack kit 20-pack snap-in cage nut inserts 10-32 for 19 inch racks

Product image: Ubiquiti uacc-rack-pm-kit unifi snapmount rack kit 20-pack snap-in cage nut inserts 10-32 for 19 inch racks-null
Product image: Ubiquiti uacc-rack-pm-kit unifi snapmount rack kit 20-pack snap-in cage nut inserts 10-32 for 19 inch racks-null
Product image: Ubiquiti uacc-rack-pm-kit unifi snapmount rack kit 20-pack snap-in cage nut inserts 10-32 for 19 inch racks-null
Product image: Ubiquiti uacc-rack-pm-kit unifi snapmount rack kit 20-pack snap-in cage nut inserts 10-32 for 19 inch racks-null
Product image: Ubiquiti uacc-rack-pm-kit unifi snapmount rack kit 20-pack snap-in cage nut inserts 10-32 for 19 inch racks-null
UBIQUITI
🔥Πωλείται γρήγορα!

Ubiquiti uacc-rack-pm-kit unifi snapmount rack kit 20-pack snap-in cage nut inserts 10-32 for 19 inch racks

€ 72.85
ή
Πλήρωσε σε 3, 6 ή 9 άτοκες δόσεις με 0 χρεώσεις υπηρεσίας χρησιμοποιώντας το Fleksy image
Επιλογή Χρώμα: Black
Σε απόθεμα
–+
–+
144
Points earned
Μπορείτε να κερδίζετε βαθμούς Ανταμοιβή κάθε φορά που πραγματοποιείτε μια πληρωμή με τις κάρτες της Τράπεζας Κύπρου.
Ο αριθμός των βαθμών Ανταμοιβή και το αντίστοιχο ποσό χρημάτων που εμφανίζονται είναι ενδεικτικά και μπορεί να διαφέρουν κατά καιρούς. Θέλετε να μάθετε περισσότερα; Ελέγξτε τις Συχνές Ερωτήσεις μας εδώ.
Εάν είστε δικαιούχο μέλος του σχεδίου επιβράβευσης Pronomia της Τράπεζας Κύπρου, θα λαμβάνετε επιπλέον βαθμούς Ανταμοιβή ανάλογα με την βαθμίδα σας.
Από: Singular Computers Systems LTD
Περισσότερα από αυτό το κατάστημα
Επιλογές μεταφορικών
Σημεία / Θυρίδες παραλαβής
Εκτ. παράδοση: 03 Αυγ - 04 Αυγ
Δωρεάν
Παράδοση στην πόρτα σου
Δωρεάν αποστολή για παραγγελίες άνω των € 85.00 από το Singular Computers Systems LTD
Εκτ. παράδοση: 03 Αυγ - 05 Αυγ
€ 3.49

Περιγραφή

Αριθμός προϊόντος: 6fd1d43f-eb2a-4145-bf7f-da8d375a1b5d
UniFi SnapMount Rack Kit — 20-Pack UACC-Rack-PM-KitSnap-in cage-nut inserts#10-32 screws included20-pack — covers 10U The Ubiquiti SnapMount Rack Kit 20-Pack (part number UACC-Rack-PM-Kit) replaces fiddly loose cage nuts with 1U snap-in inserts: each PA66 thermoplastic clip carries two perfectly aligned #10-32 nuts, so rack ears always land level and centred. Twenty inserts cover ten rack units of installations — no pinched fingers, no misaligned holes. Typically in stock with fast delivery acr

Λεπτομέρειες

UniFi SnapMount Rack Kit — 20-Pack

UACC-Rack-PM-KitSnap-in cage-nut inserts#10-32 screws included20-pack — covers 10U

The Ubiquiti SnapMount Rack Kit 20-Pack (part number UACC-Rack-PM-Kit) replaces fiddly loose cage nuts with 1U snap-in inserts: each PA66 thermoplastic clip carries two perfectly aligned #10-32 nuts, so rack ears always land level and centred. Twenty inserts cover ten rack units of installations — no pinched fingers, no misaligned holes. Typically in stock with fast delivery across Cyprus.

Compatibility note: Fits square-hole rack rails up to 2.2 mm thick, using #10-32 screws. Load ratings: 1U devices up to 400 mm deep / 10 kg; 2U up to 325 mm / 20 kg — support deeper or heavier gear from the rear as well.

Key Features

 
Cage nuts, solved
Each insert snaps into the rail with two vertically aligned nuts — every device mounts level on the first try, without the classic cage-nut finger fight.
 
Rated, not guessed
Ubiquiti publishes tested shear limits: 10 kg at 1U (≤400 mm depth) and 20 kg at 2U (≤325 mm), so you know exactly what the front rails can carry alone.
 
Ten units per pack
Twenty textured PA66 inserts (4 g each) with screws cover a 10U build-out — enough for a full UniFi wall rack in one pack.

Technical Specifications

Identification
Part Number UACC-Rack-PM-Kit
EAN / GTIN 0810084693322
MPN UACC-Rack-PM-Kit
Physical
Dimensions 42.7 × 15.5 × 8.7 mm per insert
Weight 4 g per insert
Material Thermoplastic (PA66), textured
Rail thickness Up to 2.2 mm
Screws #10-32
Pack size 20 inserts (10U of installation)
Load Ratings (tested)
1U devices Up to 400 mm depth, max 10 kg
2U devices Up to 325 mm depth, max 20 kg — deeper/heavier gear needs rear support

Frequently Asked Questions

Do these replace standard cage nuts?
Yes — each insert snaps into square-hole rails and provides two aligned #10-32 threads, doing the job of two cage nuts with none of the alignment hassle.
Will they work in non-Ubiquiti racks?
They fit standard square-hole rails up to 2.2 mm thick, so most 19" racks and cabinets qualify — not just UniFi racks.
What do I need to know before buying?
Screws are #10-32 (included); heavy or deep equipment beyond the published ratings should also be supported at the rear.
Singular Expert Insight
SnapMounts shine in frequently changed racks — labs, MSP staging benches, growing installs — where cage nuts get inserted and removed constantly. Twenty inserts per pack matches Ubiquiti’s rack ecosystem (SnapMount slots ship on UniFi rack ears too). Fill the rack with hardware from our networking range.

Buyer’s Guide

Buy it if
you install or re-arrange rack gear often and want aligned, rated, finger-friendly mounting hardware — 10U covered per pack.
Skip it if
your rack has threaded (tapped) rails — inserts are for square-hole rails only.
Also consider
standard cage-nut sets for tapped-rail cabinets, or the UACC OCD panels to finish the rack front.