Κλείσιμο

Zebra zq320 plus 3 inch indoor mobile label receipt printer 203dpi USB-c Wi-Fi 5 bluetooth nfc label sensor black

Product image: Zebra zq320 plus 3 inch indoor mobile label receipt printer 203dpi USB-c Wi-Fi 5 bluetooth nfc label sensor black-null
Product image: Zebra zq320 plus 3 inch indoor mobile label receipt printer 203dpi USB-c Wi-Fi 5 bluetooth nfc label sensor black-null
ZEBRA
🔥Πωλείται γρήγορα!

Zebra zq320 plus 3 inch indoor mobile label receipt printer 203dpi USB-c Wi-Fi 5 bluetooth nfc label sensor black

€ 760.80
ή
Πλήρωσε σε 3, 6 ή 9 άτοκες δόσεις με 0 χρεώσεις υπηρεσίας χρησιμοποιώντας το Fleksy image
Επιλογή Χρώμα: Black
Σε απόθεμα
–+
–+
1520
Points earned
Μπορείτε να κερδίζετε βαθμούς Ανταμοιβή κάθε φορά που πραγματοποιείτε μια πληρωμή με τις κάρτες της Τράπεζας Κύπρου.
Ο αριθμός των βαθμών Ανταμοιβή και το αντίστοιχο ποσό χρημάτων που εμφανίζονται είναι ενδεικτικά και μπορεί να διαφέρουν κατά καιρούς. Θέλετε να μάθετε περισσότερα; Ελέγξτε τις Συχνές Ερωτήσεις μας εδώ.
Εάν είστε δικαιούχο μέλος του σχεδίου επιβράβευσης Pronomia της Τράπεζας Κύπρου, θα λαμβάνετε επιπλέον βαθμούς Ανταμοιβή ανάλογα με την βαθμίδα σας.
Από: Singular Computers Systems LTD
Περισσότερα από αυτό το κατάστημα
Επιλογές μεταφορικών
Σημεία / Θυρίδες παραλαβής
Εκτ. παράδοση: 23 Ιουν - 24 Ιουν
Δωρεάν
Παράδοση στην πόρτα σου
Δωρεάν αποστολή για παραγγελίες άνω των € 85.00 από το Singular Computers Systems LTD
Εκτ. παράδοση: 23 Ιουν - 25 Ιουν
Δωρεάν

Περιγραφή

Αριθμός προϊόντος: f92ecc33-d7d9-436e-9b5a-3ecd33126012
Singular Selected Zebra ZQ320 Plus 3" Indoor Mobile Receipt & Label Printer — Wi-Fi + Label Sensor Indoor 3-inch Zebra mobile printer with label sensor — Wi-Fi 5, Bluetooth 4.2 + BLE and NFC for warehouse, retail and back-office mobile workers. Indoor VariantWi-Fi 5 + BT + NFCLabel SensorZPL + CPCL The Zebra ZQ320 Plus (ZQ32-A0W03RE-00) is the indoor Wi-Fi variant of Zebra’s 3-inch mobile receipt and label printer line. It prints at 203 dpi up to ~100 mm/sec on rolls up to 40 mm diameter, with

Χαρακτηριστικά

Λεπτομέρειες

Singular Selected

Zebra ZQ320 Plus 3" Indoor Mobile Receipt & Label Printer — Wi-Fi + Label Sensor

Indoor 3-inch Zebra mobile printer with label sensor — Wi-Fi 5, Bluetooth 4.2 + BLE and NFC for warehouse, retail and back-office mobile workers.
Indoor VariantWi-Fi 5 + BT + NFCLabel SensorZPL + CPCL
The Zebra ZQ320 Plus (ZQ32-A0W03RE-00) is the indoor Wi-Fi variant of Zebra’s 3-inch mobile receipt and label printer line. It prints at 203 dpi up to ~100 mm/sec on rolls up to 40 mm diameter, with a built-in label sensor for accurate die-cut label positioning. This SKU ships with USB-C, dual-band 802.11ac Wi-Fi 5, Bluetooth 4.2 + BLE and NFC pairing, supports ZPL and CPCL out of the box, and is sized for indoor warehouse, retail and hospital mobile work.
Variant Note: This is the indoor + label sensor + Wi-Fi variant. The ZQ32-A0W04TE-00 is the outdoor equivalent (IP54). Choose based on your work environment.
Best For
✓ Indoor warehouse picking
✓ Retail shelf-edge labels
✓ Pharmacy / hospital wards
✓ Inventory cycle counts
✓ Returns / customer-service
✓ Back-office mobile receipts

Key Features

 
Label Sensor Built In
Detects gap / black-mark indexing on pre-die-cut labels — accurate positioning for shelf-edge and warehouse labels, not just receipts.
 
Wi-Fi 5 + Bluetooth + NFC
Dual-band 802.11ac Wi-Fi 5, Bluetooth 4.2 + BLE and NFC tap-to-pair — full coverage of Android, iOS and Windows handhelds.
 
USB-C Charging & Data
Modern USB-C connector replaces the older micro-USB on previous-generation ZQ300 models — single connector for charge and data.
 
ZPL + CPCL Support
Drop-in replacement for existing Zebra mobile fleets — accepts ZPL (label) and CPCL (mobile receipt) formats from your existing apps.

Technical Specifications

Part Number ZQ32-A0W03RE-00
Product Type Mobile (belt-worn) thermal receipt & label printer — indoor Wi-Fi variant
Print Technology Direct thermal
Print Resolution 203 × 203 dpi (8 dots/mm)
Print Speed Up to ~100 mm/sec
Print Width Up to 72 mm (3")
Max Roll Diameter 40 mm
Memory 128 MB RAM · 256 MB Flash
Programming ZPL · CPCL
Sensors Built-in label sensor (gap / black mark)
Interfaces USB-C · Wi-Fi 802.11ac (Wi-Fi 5) · Bluetooth 4.2 + BLE · NFC
Battery Li-Ion smart battery (included, removable)
Use Indoor
In the Box Printer, Li-Ion battery, USB-C cable, belt clip
Colour Black

Frequently Asked Questions

Indoor vs. outdoor variant?
ZQ32-A0W03RE-00 (this SKU) is the indoor + label-sensor + Wi-Fi variant. The ZQ32-A0W04TE-00 is the outdoor variant (IP54 rated, no label sensor).
Can it print pre-die-cut labels?
Yes — this SKU includes a label sensor, so it accurately indexes pre-die-cut labels with gap or black-mark detection.
What programming languages does it support?
Both ZPL (Zebra Programming Language) and CPCL — drop-in replacement for existing Zebra mobile fleets.
Does it have Wi-Fi?
Yes — dual-band 802.11ac Wi-Fi 5, alongside Bluetooth 4.2 + BLE and NFC.
Singular Expert Insight
Pick this indoor ZQ320 Plus + label sensor + Wi-Fi if you print shelf / pick / hospital labels indoors over the corporate Wi-Fi. If your workers are mainly outdoors (delivery, parking, route sales), choose the outdoor ZQ32-A0W04TE-00 instead.

Buyer’s Guide

Buy it if
You need a 3" indoor mobile Zebra printer with Wi-Fi 5 + label sensor for warehouse / shelf-edge / hospital work.
Skip it if
You work outdoors in rain / dust — pick the IP54 outdoor ZQ32-A0W04TE-00 variant instead.
Also consider
Zebra ZQ310 Plus 2" (lighter) or ZQ630 Plus 4" (wider) depending on print width needs.